norgren調壓閥%英國諾冠
norgren調壓閥出廠時設置閥芯位置為全開,當有壓流體介質流經閥門后,閥后管道內壓力慢慢升高到預置調節壓力值的同時,介質通過預先安裝在調壓閥膜片或活塞執行機構和閥后管道之間連接的引壓銅管(或不銹鋼管)實現引壓作用,使調壓閥執行機構內產生相應的壓力,然后通過和執行機構連接的閥桿產生推力來克服閥桿填料摩擦力和調壓閥彈簧預緊力從而使閥芯產生上下直線運動來控制閥芯的開度以調節改變介質壓差和流量,實現調壓的目的。當閥后介質壓力值升高超過設定調節壓力時,執行機構產生的下推力增大,閥芯向下直線位移使閥門開度減小,隨之閥后介質壓力相應下降;當閥后介質壓力值減小到低于調壓閥設定壓力時,執行機構產生的下推力減小,閥芯依靠調壓閥彈簧預緊力產生的向上推力,克服執行機構產生的下推力和閥桿摩擦力后,使閥芯向上運動,閥門開度增大改變介質壓差和流量,使閥后介質壓力又向上回升,趨于接近調壓閥設定壓力值。這樣周而復始,循環動態調節,使調壓閥zui終實現調壓穩壓作用。
norgren調壓閥%英國諾冠
L72C3APQEN-251 L72C3APQEN-255
L72C3APQEN-257 L72C3APQEN-260
L72C3APQLN-251 L72C3APQLN-260
L72C3APQTN-040 L72C3APQTN-210
L72C3APQTN-211 L72C3APQTN-241
L72C3APQTN-251 L72C3APQWN-257
L72C3AS001 L72C3AXXXX
L72C3BPETN-248 L72C3BPQDN-234
L72C3BPQTN-234 L72C3BXXXX
L72C3JPEWN L72CXXPXXX
L72CXXXDRX L72CXXXDUX
L72CXXXEDX L72CXXXEDX-248
L72CXXXEEX L72CXXXELX
L72CXXXERX L72CXXXETX
L72CXXXEUX L72CXXXE
L72CXXXQDX L72CXXXQDX-210
L72CXXXQDX-256 L72CXXXQDX-266
L72CXXXQEX L72CXXXQEX-066
L72CXXXQEX-251 L72CXXXQEX-255
L72CXXXQEX-257 L72CXXXQEX-AL
L72CXXXQLX L72CXXXQLX-066
L72CXXXQRX L72CXXXQTX
L72CXXXQTX-066 L72CXXXQTX-254
L72CXXXQUX L72CXXXQ